6.13　Sealing Slide and Sealing Plate

Ⅰ　Dominant Item

6.13.1　Countersunk-headed screw for fixing sealing slide must lower than sliding face of the slide.

Check quantity:to check all.

Inspection method:inspection.

6.13.2　Preset thermal expansion gap for every part of sealing slide，must meet requirements of design technical document.

Check quantity:to check all.

Inspection method:to check installation quality records or to take actual measurements.

Ⅱ　General Item

6.13.3　Tolerance for installation of sealing slide shall meet requirements in Table 6.13.3，see Figure 6.13.3.

Examination:to check all.

Inspection method:see Table 6.13.3.

Table 6.13.3　Tolerance for installation of sealing slide

Figure 6.13.3　To survey elevation of sealing slide

1-Trolley rail；2-Sealing slide；3-Longitudinal centerline of sintering equipment

6.13.4　Tolerance for installation of plate movable sealing plate shall meet requirements in Table 6.13.4.

Check quantity:to check all.

Inspection method:see Table 6.13.4.

Table 6.13.4　Tolerance for installation of plate movable sealing plate